Asus4 chord on guitar: fingering and notes
Asus4 is a suspended fourth (sus4) chord made of A, D and E. This shape uses 5 strings in open position.
Where each finger goes
- Index finger on string 4 (D), fret 2.
- Middle finger on string 3 (G), fret 2.
- Ring finger on string 2 (B), fret 3.
- Let string 5 (A) and string 1 (high E) ring open.
- Don’t play string 6 (low E): start your strum on string 5 (A).
Notes in the chord
Formula: 1 – 4 – 5
| String | Fret | Note | Interval |
|---|---|---|---|
| string 5 (A) | open | A | root |
| string 4 (D) | 2 | E | perfect fifth |
| string 3 (G) | 2 | A | root |
| string 2 (B) | 3 | D | perfect fourth |
| string 1 (high E) | open | E | perfect fifth |
Check that every string rings
- Pick the strings one at a time from string 5 (A) to string 1. Every note should ring for about a second without buzzing or going dull.
- A dull or muted note usually means a fingertip is leaning on the next string: arch the finger so only the tip touches.
- A buzzing note usually means the finger is too far from the fret wire: slide it closer without pressing harder.
- Strings you don’t play should stay silent: aim the strum, or touch them lightly with a free finger.
Practise: change between Asus4 and A
- Set the metronome to 60 BPM in 4/4 (the button below applies these settings).
- Strum Asus4 once on beat 1 and let it ring through beats 2, 3 and 4.
- During beat 4, lift your fingers and move to A so it sounds exactly on the next beat 1.
- Keep alternating Asus4 and A for eight bars. When three changes in a row land on the beat with every string ringing, raise the tempo by 5 BPM.
What to listen for: the new chord starts on the click of beat 1, not after it, and no string goes silent during the change.
Where this chord is used
Suspended chords usually stand in for, or lead into, the plain chord on the same root: try Asus4 → A.
Further reading
Fingerings and explanations by Sowlea. Each shape is checked automatically: the notes it sounds in standard tuning must be exactly the notes of the chord.